In Clifford, bathroom mold removal cost varies dramatically based on how far the mold has spread: surface mold on ceiling/walls (from condensation, not a leak) $500-$1,000; mold behind a vanity from a slow supply-line drip $1,000-$2,500; mold throughout the shower surround and subfloor from a failed pan $2,500-$5,000+. During inspection, we use thermal imaging and moisture meters to find exactly where the moisture is coming from — because the cost depends entirely on what's wet behind what you can see.
Bathroom Ceiling Mold Removal: $500-$1,200
Ceiling mold in Clifford bathrooms typically comes from condensation (undersized exhaust fan) or a plumbing leak from above. We contain the bathroom, cut out affected ceiling drywall, treat joists with antimicrobial, replace with mold-resistant drywall, finish to match. Includes exhaust fan CFM assessment.
Bathroom Wall & Tile Mold Removal: $800-$2,500
Mold behind tile and drywall in Bartholomew County bathrooms — often from failed grout, cracked caulk, or leaking shower valve. We remove affected wall materials (tile, backer board, drywall), treat framing with penetrating antimicrobial, waterproof the cavity, replace with cement board and tile or mold-resistant drywall with paint. Surface matching included.
Vanity & Cabinet Mold Removal: $600-$2,000
Slow plumbing drips under Clifford bathroom vanities create hidden mold colonies that go unnoticed for months. We remove the affected vanity base, treat the wall and floor behind it, replace with a new moisture-resistant vanity, and fix the leak. If the vanity is salvageable, we treat and seal the affected area.
Shower & Tub Surround Mold Removal: $1,500-$5,000+
Failed shower pans, cracked grout, and leaking tub surrounds in Indiana bathrooms create mold throughout the substrate — backing board, subfloor, and wall framing. This is the most expensive bathroom scope. We contain, demo to the studs and subfloor, treat everything, waterproof with modern membrane systems, and rebuild. Typically 5-10 days.
Subfloor Mold Removal: $700-$2,000
Bathroom subfloor mold in Bartholomew County homes is common around toilets (wax ring failure), tubs (overflow or supply leak), and under vinyl flooring (seam failure). We contain the bathroom, cut out affected subfloor to clean joists, treat framing, install new plywood subfloor, and prepare for new flooring. Existing flooring removal/installation priced separately.
Exhaust Fan Replacement & Ventilation: $300-$800
The #1 cause of bathroom mold in Clifford is an undersized or non-venting exhaust fan. We remove the old unit, install a properly sized Panasonic or Broan fan (80-110 CFM minimum for bathrooms), duct it to the exterior (never into the attic), and install a timer switch. This single upgrade prevents 80%+ of future bathroom mold.
Mold-Resistant Drywall & Paint: Included
Every bathroom mold removal in Clifford uses mold-resistant materials: GP DensArmor (paperless drywall) or cement board in wet areas, mold-inhibiting primer (Zinsser Perma-White or similar), and bathroom-rated satin/eggshell paint. These materials are standard in our quotes — not an upcharge.
Post-Removal Clearance & Prevention: $300-$500
After bathroom mold removal in Bartholomew County, we collect air samples and compare to pre-removal baseline. The lab report confirms the bathroom spore count is within normal ranges. We also provide a bathroom-specific moisture-control plan: exhaust fan timer settings, caulk maintenance schedule, and plumbing fixture inspection intervals.