In Bartholomew County’s climate, an unsealed crawl space is the single biggest contributor to indoor mold problems. Open vents invite humid outdoor air that condenses on cool floor joists. Soil evaporation pumps moisture into the space 24 hours a day. The solution: encapsulation mold remediation — professional mold removal followed by a sealed vapor barrier, closed foundation vents, and a properly sized dehumidifier. We deliver the complete package for Clifford (47226) homes in one written scope from one IICRC-certified crew.
Comprehensive Services in Clifford, IN
We perform Encapsulation Mold 47226 Clifford IN entirely with our own crew — no subcontracting. Inspection, testing, containment, HEPA-filtered removal, drying, and clearance testing under one IICRC-certified team serving Clifford, IN.
Complete encapsulation with 12-mil reinforced vapor barrier across crawl space floor, foundation walls, and support piers. Sealed seams, taped penetrations, and mechanical fastening per Indiana building code for Clifford properties.
Heavy-duty 12-mil minimum polyethylene vapor barrier installed across the entire crawl space floor with 6-inch overlap seams. Extends up foundation walls to sill plate and is mechanically fastened every 12 inches.
Energy Star-rated commercial dehumidifier properly sized for your crawl space’s cubic footage and Bartholomew County’s climate conditions. Condensate line plumbed to exterior or sump pump.
Permanent sealing of foundation vents with rigid foam insulation and spray foam perimeter. Rim joist insulation with closed-cell spray foam to prevent air leakage and condensation at the sill plate.
Interior perimeter drain system with sump pump basin and 1/3-HP cast-iron pump. Discharge line plumbed away from foundation per Indiana code. Battery backup pump available.
Complete mold removal from crawl space framing, subfloor, and foundation walls before any encapsulation material is installed. HEPA-filtered containment, antimicrobial treatment, and structural drying.
EPA-registered borate-based fungicide applied to all exposed wood framing members. Penetrates wood to prevent future mold colonization and protects against wood-destroying organisms in Bartholomew County’s climate.
Scheduled annual inspection of vapor barrier integrity, dehumidifier operation, sump pump function, and humidity levels. Written report with moisture readings specific to Clifford’s seasonal conditions.
How We Work
Built around IICRC S520 mold-remediation standard and Indiana requirements, our 7 steps begin with a documented scope and finish with independent clearance testing.
Full inspection with moisture meter, thermal imaging, and visual mold survey across your Clifford crawl space. We measure wood moisture content, relative humidity, and standing water. Written scope with photos.
Complete mold removal from all crawl space surfaces before encapsulation. HEPA containment, antimicrobial treatment, and structural drying to IICRC S520 standards.
Install or repair perimeter drains, sump pumps, and exterior grading. Standing water issues must be resolved before encapsulation. Foundation crack sealing where needed for Bartholomew County properties.
12-mil reinforced polyethylene installed across entire crawl space floor and up foundation walls to sill plate. All seams overlapped 6 inches and taped. Mechanical fasteners every 12 inches.
Permanent sealing of all foundation vents with rigid foam board and spray foam. Closed-cell spray foam applied to rim joist bays to stop air infiltration and condensation.
Commercial dehumidifier sized for crawl space cubic footage and the Bartholomew County climate. Condensate line routed to sump pump or exterior drainage. Humidity set point at 50-55%.
Independent third-party mold testing to verify zero active mold colonies. Written clearance certificate provided. Humidity monitored for 7 days post-installation to confirm stable conditions.
Inside the Work
In Bartholomew County properties, the two most common mold sources are damp crawl spaces and contaminated HVAC ductwork. Here is what proper remediation looks like.
Containment, antimicrobial treatment, vapor barrier, and dehumidifier sizing for Bartholomew County properties.
Coil cleaning, blower sanitization, full duct decontamination to restore indoor air quality.
Transparent Pricing — Nobody Else In Clifford Publishes This
You see the price before equipment comes off the truck. Most projects in Clifford are quoted as single fixed scope, not time-and-materials.
| Service | Typical Range (Clifford, IN) | What's Included |
|---|---|---|
| Crawl Space Mold Inspection | $150 – $350 | Moisture mapping, thermal imaging, wood moisture readings, written assessment |
| Crawl Space Mold Remediation (pre-encap) | $1,500 – $5,000 | HEPA containment, mold removal, antimicrobial treatment, structural drying |
| 12-Mil Vapor Barrier Installation | $1,200 – $3,500 | Full floor coverage, foundation wall wrap, taped seams, mechanical fastening |
| Foundation Vent Sealing (per vent) | $75 – $200 | Rigid foam + spray foam perimeter seal, airtight and code-compliant |
| Commercial Dehumidifier (installed) | $800 – $2,200 | Energy Star unit, sized for space, plumbed condensate line, humidity controller |
| Full Crawl Space Encapsulation Package | $3,500 – $9,000 | Mold removal, vapor barrier, vent sealing, dehumidifier, post-remediation test |
| Sump Pump & Perimeter Drain | $1,200 – $3,500 | Interior trench drain, sump basin, cast-iron pump, exterior discharge line |
| Post-Encapsulation Verification Test | $300 – $600 | Third-party lab clearance, written certificate |
Indiana Specialty
Clifford IN sits in southern Indiana’s Bartholomew County, where Midwest thunderstorm systems roll through from April through September, delivering drenching rains that saturate the clay-heavy soil around foundations. Older brick commercial buildings and historic homes in the area — many dating from the railroad boom of the late 1800s — have porous masonry that wicks groundwater into interior walls. Summer humidity routinely exceeds 80% in the Columbus metro corridor, and combined with poor ventilation in older structures, mold colonies establish behind baseboards and inside wall cavities within 48 hours of a water event.
Why Clifford Chooses Us
Many listings for this search route to call centers in another state. We don't. We have an actual Clifford address, directly-staffed local dispatch, and field technicians running Bartholomew County routes weekly.
7850 N Depot St, Clifford, IN 47226. Walk in. The other "local" pages list out-of-state phone numbers.
Applied Microbial Remediation Technician training — the industry standard. Required for any insurance-grade job in Indiana.
Operating under Indiana licensing for mold remediation contractors. License number on every written estimate.
Every remediation includes pre and post-remediation mold testing. Written proof the mold is gone before walls go back up.
Published price ranges. Fixed written quote on site. No hourly creep, no day-rate surprises.
We document the root cause and bill State Farm, Allstate, USAA, Citizens, Liberty Mutual and others directly.
Tenants get inspection reports that meet Indiana habitability standards — admissible in landlord disputes.
Same foreman from inspection to clearance. No subcontractor handoffs, no scope drift.
Bartholomew County Service Area
Our Clifford-based crew dispatches across Bartholomew County towns listed below; typical emergency arrival window under 60 minutes.
Don't see your town? We dispatch anywhere within a 90-minute radius of Clifford — call (332) 220-0303 to confirm.
From Clifford Customers
"Our historic brick home near the railroad tracks had mold creeping up the basement walls from groundwater wicking through the masonry. They excavated the exterior, sealed the brick, installed a French drain, and remediated the basement interior. Feels like a new house."
"After a severe thunderstorm flooded our finished basement with six inches of water, mold was visible on the drywall within four days. They pumped, contained, removed all affected materials, and had the basement dried and treated within a week."
"We kept getting sick every winter — turned out the HVAC system had been circulating mold spores from a contaminated air handler. They cleaned the entire system, including every supply duct, and we haven’t been sick all season."
"Crawl space under our 1950s ranch was a swamp. They encapsulated it, put in a commercial dehumidifier, and sealed the foundation vents. The house smells clean for the first time in 20 years."
Direct-Bill Insurance Partners
When mold comes from a sudden, accidental water event — burst pipe, appliance failure, storm, sewage backup — most Indiana policies cover it. We document the root cause and bill your insurer directly.
Answers
For encapsulation mold 47226 clifford in in Clifford, expect $500-$1,500 for light areas, $1,500-$4,000 for moderate scope, and $4,000-$10,000+ for extensive work. Inspection $150-$350, testing $250-$500. Written fixed-scope quote on site. Full pricing above.
For encapsulation mold in Clifford, a full crawl space encapsulation package including mold removal, 12-mil vapor barrier, vent sealing, and commercial dehumidifier ranges from $3,500-$9,000 depending on square footage and accessibility. Mold removal alone runs $1,500-$5,000. Vapor barrier installation is $1,200-$3,500. We give a written, fixed-scope quote during the on-site assessment. Full breakdown is in the pricing table above.
A vapor barrier (6-mil plastic laid on the ground) slows soil moisture evaporation but doesn’t seal the space. True encapsulation involves: (1) complete mold removal from all surfaces, (2) 12-mil reinforced vapor barrier extending up foundation walls to the sill plate, (3) permanent sealing of all foundation vents, (4) closed-cell spray foam on rim joists, and (5) a commercial dehumidifier sized for the space. Encapsulation creates a conditioned, dry environment — a vapor barrier alone just slows the problem down.
Yes. All remediation work takes place in the crawl space, which is under negative-pressure HEPA containment. The living areas above are unaffected. Dehumidifier operation is quiet. Most projects are completed in 3-7 days depending on square footage. No need to vacate your Clifford property.
In Bartholomew County’s climate, outdoor humidity alone — combined with Midwest Thunderstorms & Historic Building Moisture conditions — keeps an unsealed crawl space above 60% relative humidity for most of the year. At that level, wood moisture content exceeds 20% and mold colonizes within 48 hours. Every vented crawl space in this climate is a mold risk. Encapsulation is the only permanent solution recognized by the EPA and U.S. Department of Energy for moisture control in this type of foundation.
Encapsulated crawl spaces reduce heating and cooling costs by 15-20% on average because you’re not conditioning the air that leaks up through the floor from a damp, vented crawl space. The Department of Energy confirms that sealed, conditioned crawl spaces outperform vented ones in every climate zone. In Bartholomew County’s humid summers, the savings are even more pronounced.
Yes. Our technicians hold IICRC AMRT certification and we operate as a licensed mold remediation contractor in Indiana. License number on every written estimate.
Small jobs 1-3 days. Moderate 3-7 days. Extensive work requiring structural drying takes 7-14 days. Written timeline provided during on-site inspection at your Clifford property.
Every encapsulation mold 47226 clifford in includes: on-site inspection with moisture mapping, pre-remediation testing, containment with HEPA air scrubbers, physical mold removal, EPA-registered antimicrobial treatment, structural drying with commercial dehumidifiers, and third-party post-remediation verification testing. Plus a moisture-control prevention plan specific to Clifford.
Most Indiana policies cover mold when caused by a sudden, accidental water event (burst pipe, storm, sewage backup). Gradual leaks or humidity are typically excluded. We document the root cause with photos/moisture readings — if covered, we bill your insurer directly.
Watch
A short walkthrough of how a typical Clifford mold remediation job runs — from inspection to post-remediation clearance.
Explore More Resources
About the Author
Our Clifford, IN team operates from 7850 N Depot St, Clifford, IN 47226 and serves Bartholomew County and all surrounding areas. Call (332) 220-0303 anytime — lines are staffed 24/7/365. We hold IICRC AMRT certification, Indiana contractor licensing, and maintain full liability insurance. Every project is backed by pre and post-remediation verification testing and a written guarantee.
Get a same-day quote for Encapsulation Mold 47226 Clifford IN in Clifford. Call (332) 220-0303 — lines staffed live, day or night. Free 15-minute phone triage. Written, fixed-scope quote on site. Root-cause resolution, safe removal, lab-verified clearance.
7850 N Depot St, Clifford, IN 47226 · Open 24 hours · Bartholomew County & Indiana